Products

Extruded Finned Tube

Product FeaturesExtruded fin offers excellent corrosion protection of the base tube and is much stronger than the applied fin tubes due to the work hardening of the fin material during extrusion proce

Tube O.D. : 10.0 to 51.0 (mm)
Tube Wall Thk. : 1.65 to 3.0 (mm)
Tube Length : /
Tube Material : C.S., S.S., Copper Based Alloys,Titanium
Fin Thk. : 0.3 to 1.2 (mm)
Fin Height : 5.0 to 16.0 (mm)
Fin Pitch : 67 to 500 FPM
Fin Material : Aluminum, Copper

Product Features

Extruded fin offers excellent corrosion protection of the base tube and is much stronger than the applied fin tubes due to the work hardening of the fin material during extrusion process. It provides great resistance (fin stiffness) as well as exceptional heat transfer characteristics (longevity, temperature, range, etc.). The mechanical bond joining liner tubes and aluminum wall offers superior durability and insures no corrosion occurs between the fins and the tubes. The "double-wall" construction makes them more durable and heat-efficient. You can also choose from among several types of tube materials, which allows our heat exchangers to be specifically adapted to a given application. In addition, it can also extend the lifetime of heat exchangers and improve their efficiency and reliability.

The advantages of extruded aluminum fin tubes are as follows:

(1) Easy to clean with a high-pressure water jet without deforming the fins

(2) The tube is not mechanically stretched to adhere to the fins

(3) Uniform and reliable heat transfer

(4) No galvanic corrosion between the tube and fins

(5) The fins are vibration resistant

(6) Perfectly suited to industrial applications

(7) Unequalled quality/price ratio for demanding applications

Fabrication Process

Extruded Finned Tube.jpg

Aluminum extruded fin tubes is formed from a bi-metallic tube. Consisting of an aluminum outer core and an parent tube of almost any material. The fin is formed by rolling material from the outside of the exterior tube to give an integral fin. The extruded fin is manufactured by compressing an aluminum outer core tube onto the parent tube. The outer core tube is exposed to extremely high pressures which essentially "grows" the fins into the final fin profile. Maximum operating temperature for this fin type is 290°c.

Production Capacity

Total eight(8) bi-metallic finning lines, monthly production capacity is 150,000 meters in total.

Dimension and Material

The following table shows Simcan’s manufacturing capabilities: 

Tube O.D.:

10 to 51 (mm)

0.4" to 2"

Tube Wall Thk.:

1.65 to 3.0 (mm)

0.065" to 0.118"

Tube Length:

No practical limit

No practical limit

Fin Thk.:

0.3 to 1.2 (mm)

0.012" to 0.047"

Fin Height:

5 to 16 (mm)

0.2" to 0.63"

Fin Pitch:

67 to 500 (mm)

1 to 12 FPI

Fin Type:

Extruded

Fin Material:

  • Aluminum (most common grade: Alu.1100, Alu.1060, Alu.6063 )

  • Copper

Tube Material:

  • C.S. (most common grade: A179, A192,SA210 Gr A1/C,A106 Gr B )

  • S.S. (most common grade: TP304, 316, 321, 347,A789 S31803/S2205 )

  • Copper (most common grade: UNS12200,14200, 70600, CuNi70/30, CuNi 90/10 )

  • Titanium (most common grade: B338 Gr 2) 

* This table is used as a general guide to our capabilities, please call us for any other customized cases.

Codes and Standards

As per drawings and client’s Requirements

Surface Treatment and Protection

Each tube will be cleaned free of rust, grease, residues or any other contaminants before extruding.


Packaging

Each package is designed and made according to seaworthy packing standard and clients’ handling and lifting capability.

Finned tubes will be packed into steel frameworks and wrapped with weather proof PE film and plywood board covering up. In addition, each row of finned tubes will be isolated from adjacent with EPE(Expandable Polyethylene) foam to prevent rigid impact during transportation. For all exporting packages, we only use plywood instead of wood for fumigation free purpose.   


Documentation

As a professional supplier, Simcan does not only manufactures products but also has full capability on preparing and submitting documents as listed below but not limited to:

Before Fabrication

  • Design and Fabrication Schedule

  • Drawings and data

  • Fabrication Procedures

  • Inspection and Test Plan (ITP)

During Fabrication

  • Daily, weekly or monthly progress report

After Fabrication

A complete set of final archive including

  • Raw Material Mill Certificates

  • Product Conformity Certificate

  • Inspection Reports including Material Receipt Inspection Report, Test Report etc.

  • Test report by world reputable third party such as TÜV, BV, SGS, Lloyd's, ABS, Intertek(Moody), Shanghai Jorson etc. if any

  • Packing List and Proforma Invoice

  • Certificate of Origin or any other documentation mandatory for clients’ customs clearance or tax preference


About Us

Quality Control

Friendly Link

Fllow Us

For easy and efficient communication